Overview
Drink-Mix & Electrolyte Ready! Requires zero setup time and makes 24 fl. oz. of clean drinking water in a blazing fast 8 seconds (5L/min) for stealth on-the-go filtration and purification. Covert Edition bottles discreetly provide clean drinking water anywhere on earth with unrivaled ease, speed & convenience. It's highly coveted everyday carry—sip or chug, fill a hydration reservoir, fill another water bottle, or use for backcountry cooking.
Virtually no setup time, and fastest performance, GeoPress® purifies and filters contaminated water in 8 seconds (5 liters per minute) from any water source. From adventure travel to survival make the world’s sketchiest freshwater sources clean to drink from.
The silicone One-Way Valve prevents liquid from reversing direction and flowing back into the filter Cartridge. Allowing the use of electrolytes, drink mixes, and other beverages with your Grayl GeoPress® Filter & Purifier Bottle.
Bring the GeoPress® along for the ride as your empty lightweight vessel. There is no need to carry along a bottle thats heavy and filled to the top. Just Fill. Press. Drink. and be on your way with your empty Grayl.
SHOP HIP PACKS TO CARRY GEOPRESS®By Clicking the Link
The river’s at your feet... Taste it! GeoPress is your all-day companion with the capacity to hold 24 fluid ounces of purified water keeping you hydrated with each river fill-up.
RiverFlow® Spout
A wide contoured spout delivers a fast flow of water.
SimpleVent®
Twist the cap 1/2 turn to vent air during purification process.
Large Carry Handle
Big enough for two-finger carry, or carabiner clip-it to your bag.
SoftPress®
Comfortable pressing pad provides for an ergonomic, non-slip large pressing surface.
Holds 24 fl oz (710 ml) of clean, filtered and purified water. NOTE: Dirty water never enters the Inner Press.
Filters & purifies 8 seconds per 24 fl oz (5 liters/minute).
350 presses (250L/65 gal). Removes viruses plus bacteria and protozoa. Improves taste, smell and clarity. Filters microplastics, PFAS, and lead.
TopoGrip® Surfaces
Durable, tactile non-slip grip material placed on all heavy use surfaces.
Max Fill Line
A maximum fill line is located on the backside of the Outer Cup. 24oz (710ml).
Non-Slip Base
Soft, non-slip base provides durable protection.
To maximize the lifespan of a cartridge, always choose the clearest water. GeoPress® cartridges deliver ~350 cycles (250 liters / 65 gallons) while UltraPress® offer ~300 cycles (150 liters / 40 gallons). Water quality matters; avoid silt and sediment. Preemptively filter out silt and sediment with a handkerchief or t-shirt to extend the life of a cartridge.
The time it takes to press with your GeoPress® or UltraPress® will gradually increase over time. We recommend replacing the cartridge once the 'press time' reaches approximately 25 seconds (or three years have passed since the first use). Please note that colder water may require longer pressing time and does not necessarily mean the cartridge needs to be replaced.
An unused and airtight cartridge can be stored for up to 10 years. Once opened, use it for 3 years or until press time is ~25 seconds.
GeoPress® and UltraPress® cartridges filter and purify most freshwater sources. Avoid using them with salty or brackish water. When treating freshwater, start with the cleanest water available, such as streams and rivers.
Grayl's activated carbon effectively adsorbs many chemicals, pesticides, herbicides, heavy metals, etc. However, it is not designed for industrial disasters, coal ash spills, high lead levels, mercury, nuclear disasters, high tannin concentrations, or water with toxic blue-green algae (e.g. cyanobacteria). Find another water source in those situations.
Grayl® cartridges contains non-woven ceramic fibers that have a high electropositive charge. These fibers effectively block and trap microorganisms and particulates, ensuring that submicron contaminants are removed through electroadsorption. Additionally, the cartridge is equipped with ultra-powdered activated carbon, which efficiently adsorbs chemicals, heavy metals, bad flavors, and odors.
To avoid contamination, use the Spout Cap. If dirty water comes in contact with the Inner Press, wash the Grayl (not the cartridge) with soapy water and rinse thoroughly. Alternatively, dilute contaminants by pressing and agitating water through a GeoPress® or UltraPress® purifier bottle 5-7 times.
Proper maintenance for your GeoPress® or UltraPress® is crucial for optimal performance. After your adventures, ensure to follow these simple steps to keep your purifier in top shape. Start with a 'dry press' by pressing the wet purifier into the empty Outer Cup and disposing of excess water. Next, remove the cartridge and allow it to air-dry for 2-4 days. For the remaining parts, hand wash them with warm, soapy water and let them air-dry. To maximize the lifespan of the cartridge, store the unit assembled. With proper care, the cartridge can last up to three years.
Yes, experience the hydration benefits of electrolyte-infused water in a UltraPress® or GeoPress® when equipped with a One-Way Electrolyte & Drink-Mix Valve (available since April 2023).
Always add electrolytes into the clean drinking water side. Avoid adding flavoring or electrolytes directly into a cartridge not equipped with a One-Way Drink Mix Valve, as it can diminish the cartridge's lifespan and efficacy. In those situations, pour the clean drinking water into another water vessel and then add electrolytes or flavorings.
Size, capacity and weight! Both models offer the highest level of protection from waterborne pathogens (99.99% of virus, 99.9999% of bacteria, and 99.9% of protozoan cysts, including Rotavirus, Hepatitis A, Norovirus, Giardiasis, Cryptosporidium, E. Coli, Cholera, Salmonella, Dysentery). They also filter many heavy metals, chemicals, and microplastics.
GeoPress® filters and purifies 24 oz of water, ideal for individuals and groups looking for a high capacity. UltraPress® purifies 16.9 oz and is great for individuals with limited space or when traveling with small pack side pockets.
Grayl® filter and purifier bottles are made from: BPA-free polypropylene #5, food-grade silicone, TPE and ABS food-grade plastic. Our products are designed in Seattle, Washington, and manufactured by our partners in China with the exception of our cartridge media which is produced in the United States.
